KS digital electric room thermostat

Product description

The digital room thermostat from Thermor allows you to regulate your underfloor heating.

It has a measurement accuracy of 1/10 of a degree.

Its ease of use will impress you with:

- its automatic first heating program (for better drying of the slab or screed).

- its indicator for the wiring is integrated into the box.

- its 6-order pilot wire.

Dimensions (H x W x D): 84.7 x 89.5 x 28.5 mm

Thermostat installation method:

The thermostat is made up of 2 parts: the base (a) and the interface (b). The interface can be clipped onto the base at the end of the work. No more risk of breakage or theft!

Step 1: Fix the thermostat base (a) to a standard flush-mounting box with a 60 mm centre distance, using 2 screws.

Step 2: Very simply clip the interface (b) onto the flush-mounted part. For economical and hassle-free management, this thermostat is compatible with all programmers and managers on the market that operate via Pilot Wire.

The semi-recessed digital room thermostat has been designed to provide you with maximum comfort. It is suitable for electric underfloor heating installations. It can be connected to a programmer or energy manager via the Pilot Wire. It can manage 6 operating modes (Comfort, Comfort-1°C, Comfort-2°C, Eco, Frost Protection, Off).

Power supply 230V ± 10%, 50Hz ±10%
Consumption: 3mA
Pilot wire 6 orders (Comfort, Comfort-1°C, Comfort-2°C, Eco, Frost protection, Stop)
Cut-off capacity: ◦ 10A maximum (resistive load) ◦ 2200W under 230V
Dimensions: H. 84.7mm, L. 89.5mm, D. apparent 20.4mm, D. recessed 28.5mm

Installation:

The room thermostat must be mounted approximately 1.5 meters from the ground, on an interior wall, protected from direct sunlight, any thermal disturbance (lighting lamp; television; household appliances; fireplace, etc.) and any air current (VMC; stairwell, etc.). For your product to work properly, and to avoid parasitic air currents, it is mandatory to seal the flush-mounting box and the connection ducts.

The thermostat consists of two parts:

A plug-in front panel
A base intended to be fixed on a flush-mounting box Ø 65mm / center distance 60mm